In which environments should color rolls be stored?

The so-called color coated coil is a material made of high-end polyvinylidene fluoride resin as a raw material. With its excellent anti-ultraviolet ability, color coated coil has been widely used in the modern construction industry. Because of this, some builders will purchase color rolls in bulk and install them on the corresponding buildings, at this time, builders are faced with the problem of storing color rolls, and if the storage is not proper, it is likely to affect the quality of this material. So in which environments should builders store heat-resistant and wear-resistant color rolls?

In which environments should color rolls be stored?

First, in a dry, ventilated and clean indoor environment

Due to the use of polyvinylidene fluoride resin raw materials in the production process, the material made of this raw material is placed in an open environment or an environment filled with corrosive media for a long time, it is easy to affect the excellent performance. Therefore, if the builder has purchased a batch of color rolls, they should be placed in the indoor environment as far as possible, but also to ensure that the storage environment is in a dry, ventilated and clean state, so as to avoid the stability of the material by the erosion or destruction of the bad media in the storage environment.

Second, an open and flat site with enough bearing capacity

The outer surface of the color coated roll shows a smooth and traceless state, and it is likely to scratch the outer surface of the material if it is improperly operated during storage. Therefore, when storing color rolls, we must ensure that the storage site is open and flat, because once there are hard objects or foreign bodies touching the outer surface of the material it is easy to imprint or scratch, if necessary, the purchaser can even lay a layer of protective rubber pads on the storage site, in addition to ensuring that the storage site can bear enough weight.

For builders, the storage of color rolls is an important link before the formal use of this material, and a little attention may affect the normal use of the material in the later period. Therefore, in addition to paying attention to the storage environment of good quality color coating rolls, builders should also reasonably arrange the specific location of storage to facilitate later access, and avoid moving it as much as possible without using color coating rolls.