Welcome to Shandong Zhishang Steel Co., Ltd.

Free consultation

Get a free quote quickly!

  •     Hit Refresh

Please leave your thoughts and we will answer your questions for free.

Dec 16, 2022

Knowledge of galvanizing on the surface of galvanized steel coil

Share : 

Low treatment cost: the cost of hot-dip galvanizing is lower than other coatings;Durability: in suburban environment, the standard hot-dip galvanizing antirust thickness can be maintained for more than 50 years without maintenance. In urban or offshore areas, the standard hot-dip galvanizing antirus

  1. Low treatment cost: the cost of hot-dip galvanizing is lower than other coatings;

  2. Durability: in suburban environment, the standard hot-dip galvanizing antirust thickness can be maintained for more than 50 years without maintenance. In urban or offshore areas, the standard hot-dip galvanizing antirust coating can be maintained for 20 years without maintenance.

  3. Good reliability: the galvanized layer and steel metallurgy are combined to become a part of the steel surface, and the durability of the coating is relatively reliable.

  4. Coating toughness: the galvanized layer forms a special metallurgical structure, which can withstand the mechanical damage during transportation and use.

  5. Comprehensive protection: each part of the plated part can be galvanized, and can be fully protected even in the depression, sharp corner and concealed place;

  6. Time and labor saving: the galvanizing process is faster than other coating construction methods, which can avoid the time required for coating on the construction site after installation.

  7. Low initial cost: Generally speaking, the cost of hot-dip galvanizing is lower than that of applying other protective coatings. The reason is simple. Other protective coatings (such as sanding paint) are labor-intensive processes, while the hot-dip galvanizing process is highly mechanized, and the construction in the factory is strictly controlled.

  8. Simple and convenient inspection: the hot-dip galvanized layer can be visually inspected with a simple non-destructive coating thickness gauge.

  9. Reliability: the specification of hot-dip galvanizing is generally in accordance with BS EN 1461, and the minimum zinc layer thickness is limited. Therefore, the antirust period and performance are reliable and predictable.

hot-dip-galvanized-steel-coil.webp

Tags:
Fllow Us:

Get a free quote quickly!

    Hit Refresh

Related Post

Related Products